home > products > Rotary Dryer For Coal Chemical Industry

Rotary Dryer For Coal Chemical Industry

Capacity: 
Power: 
Application: 
Hotline:+86-371-56739888
  • Processing customized:yes
  • Product brand:DINGLI
  • Specifications:DLMG1618
  • Capacity:500t/h
  • Power:>10kw
  • Moisture Reduction:4~16%
  • Warranty: 1 year
  • Place of Origin: Henan, China (Mainland)
  • Heating Medium:Clean hot air

 Coal drying technology is divided into drum drying and drum distillation units ---- two kinds of technology.Drum drying means adopting rotary drum dryer for drying to reduce the water moisture, its products are high heat value quality coal; Drum drying distillation technology refers to using rotary drum dryer and rotary distillation machine together, the dryer dehydration and heat of coal , dry distillation machine dry distillation of lignite removal volatile part and the internal moisture,the product is high heat value, low sulfur, low water moisture, low volatile of dry distillation upgrade coal .

Coal, blue carbon drum dryer mainly by the heat source, belt feeding machine, rotary drum, belt discharging machine, induced draft fan, cyclone dust collector, bag filter, nitrogen or carbon dioxide gas oxygen concentration prosecution explosion-proof security system, power distribution and temperature, pressure, oxygen concentration, speed of interlocking spreading system.The equipment adopts the countercurrent (or downstream) drying technology, its working principle is as follows: wet material after entering drying drum points divided into the following workaround: one is the feeding area, the coal into the area with high temperature hot air quickly evaporate moisture, the material in large Angle of guide plate copy, to be imported into the next  workspace;2 it is to copy the plate area, the coal in this area is lifting by copy board and forming curtain material status, the coal temperature gradually increased to more than 150-250 ℃ (different types of coal with different temperature),at this time the material has good contact with hot air, the moisture in coal rapid evaporation and become water vapor, water vapor was siphoned off by induced draft fan,
so as to achieve the aim of depth drying;The coal in this area was dried into the moisture content less than 5% (or much lower) with state loose, after heat exchange materials achieved the required moisture state, into the final discharging area;Three is discharging area;Three is discharging area, the dryer do not set copy plate in the region, the material in this area with scroll taxiing to the discharge port, to complete the whole drying process .

Lignite drying and upgrading machine (4).jpgLignite drying and upgrading machine (5).jpg

First, Solve coal feeding uniformity and roading inside the dryer, overcome the problem such as  intermittent feeding, before plugging material, transient capacity big etc.Which is the premise to improve the evaporation intensity.

1, With unique design of the buffer bin and feeder mechanism, overcome uneven feeding of intermittent feeding problems;

2, Set up large dip Angle on the roller feeding end unpowered spiral propeller, not only evenly sent the wet slurry into drum drying section, but also make large pieces of wet coal cutting and scattered;

Second,Improve the internal structure design of the dryer, maximize the increasing the heating area between material and hot air, which is the basis of increase evaporation strength.

1, Constantly optimize roller structure layout and the feed plate design, final setting is now unique internal feed roller plate structure and different effect of mixing drum of whole section distribution.The dryer with all "material  curtain"even no dead Angle, no gap, the maximum  increase the heating area of the coal and hot air, and the heat exchange area, make the coal moisture to evaporate rapidly ,and was taken away by hot air.

2,With the original rotary drum dryer dry layer patent technology.According to the different particles material inside the drum's heating speed and speed different, set up more groups of layer drying device, dropping grate, control of small particle materials drying and pulverization, too large particle materials have different internal and external heat drying uneven phenomenon, ensure dry uniformity.

Third, reasonable selecting hot blast stove furnace, optimizing its internal structure design and laying quality, reduce the air leakage rate, reduce the oxygen content in the hot air less than 5%, 300-1200 ℃ arbitrary random control process requirement of temperature points, provide the dryer with homogeneous stable heat source,which is  the reliable safeguard of coal dryer running with high strength.

Fourth, measurement and control system adopts PLC frequency conversion control technology, temperature, pressure, oxygen concentration, speed equipment, process parameters on-line interlocking spreading, realize automatic detection and control of the whole system have centralized, on-site switching function, guarantee system to maximize capacity, optimal quality, the most energy saving mode, the safety explosion protection and stable operation.

Fifth, Optimizing the allocation of gravity settling +cyclone dust collector + wet cyclone/bag dust collector level 3 by dust bag filter dust removal equipment, dust concentration < 30 mg/Nm3, guarantee dust emission standard.

Sixth, The uniqu modular design, the manufacture, transportation, installation, assembling and commissioning platform, service concept in a more optimized design manufacturing, installation services return customers more convenient transportation, guarantee the customer's maxium benefit.

Seventh,Solve the traditional dryer downstream caused in the process of the direction of dehumidifying system temperature reduced water vapor return material, improve the efficiency of drying, achieve the goal of deep dehydration.

Eighth, the dryer using labyrinth and expandable graphite packing type double mechanical seal sealing mode, to ensure the safe operation of the dryer within tightly closed oxygen.

Nine. half carbon coke cooling machine used with raw coal  dryer series, recycled half carbon carbocoal heat used for coal drying and dewatering, both to achieve LAN charcoal semi coke dry quenching cooling, and to get low moisture LAN charcoal carbon coal, and make full use of heat energy for the depth of the coal removal moisture, temperature preheating, reduce subsequent pressure of coal chemical industry equipment, comprehensive utilization of heat energy, energy conservation, environmental protection, the perfect process is more reasonable.

Model

Capacity(T/D)

Initial moisture

(%)

Final moisture

(%)

Main power

(kw)

Covering area

(m2)

DLMG1618

200

15-30

≤5

120

8*25

DLMG1920

300

15-30

≤5

150

8*32

DLMG2224

500

15-30

≤5

200

10*40

DLMG2528

700

15-30

≤5

265

10*45

DLMG2830

1000

15-30

≤5

320

10*50

DLMG3432

1500

15-30

≤5

460

12*50

DLMG4035

2000

15-30

≤5

550

15*55

Coal slime dryer equipment produ

Coal slime dryer equipment produ

Capacity : 1000t / d

add: Russia

Shanxi's coal slime dryer equipm

Shanxi's coal slime dryer equipm

Capacity : 1000t/d

add: Shanxi China

Inner Mongolia Wulanchabu City's

Inner Mongolia Wulanchabu City's

Capacity : 1500t/d

add: Inner Mongolia

Online Message

First Name
Last Name
* Email
* Phone
Message options
    Price   Solution   Delivery   After sales
Message
没有添加