The raw material should be dried by the dryer (The moisture content is about 15%) → Feed into briquette machine → High temperature and high pressure, curing, stamping forming → Cooling → Package → Leave the factory.
The main motor is driven by the eccentric wheel to move 280 times per minute. The screw feeding machine start to feeding the raw material, then the raw material will feed into the briquette machine of feeding box by the depiler, and then will into the press room by the screw delivery from the left and right sides. The raw material will be pressed by the punch and mold, then heating-up and soften, and the volume are smaller.
On the basis of similar equipment, Dingli improve the science technology and equipment function. The machine price is according to the economic affordability of the majority of customers. Especially the farmers.
Mechanical stamping type. It can be automatic adjust the pressure angle by the high temperature and high pressure of mechanical stamping principle. The raw material does not crowded group and boring machine.
The die uses an alloy steel material, which is ternary infiltration, vacuum quenching process. The service life of die is increased between 500 ton and 700 ton.
The machine can produce the pellet or briquette. There is different diameter of die, which can be easily replaced. such as φ8mm, φ10mm, φ22mm, φ30mm, φ55mm, φ65mm, φ70mm, φ85mm.
|Diameter of Pellet (mm)||8、10、20、30、40、50、55、60、65、70、85|
|Product Density (g/cm3)||1.0-1.3|
|Main Motor Power (Kw)||45||75|
|Auxiliary Motor Power (Kw)||15||21|
|Overall Dimensions (mm)||L3400*W2000*H1800||L4500*W2000*H2000|