Home > Moldingseries>Biomass Pellet Fuel Production Line
Product Center
Products Details
Biomass Pellet Fuel Production Line

Biomass Pellet Fuel Production Line

【Application】 Agriculture and forestry waste :Groundnut-shell ,Sugarcane Biogases , Caster Shells/Stalk , Saw dust , Coffee Husk , Paddy Straw and others
【Raw Material】lower than 10 mm
【Moisture Content】10-15%


Production   Introduction
Biomass energy is second only to coal, oil and natural gas one of the world's total energy consumption 4th.According to experts predict that biomass energy is likely to become an important part of the future sustainable energy system, at the middle of this century, using new technology to produce all kinds of biomass alternative fuels will account for more than 40% of total global fuel consumption.
Because the biomass as fuels has no contamination, and other significant characteristics of renewable, thus it increasingly brought to the attention of the countries.



ff5333fc79497a9b4030b488a59438f7.jpg



With the continuous development of world economy, energy shortage problem is increasingly serious, in order to solve the energy crisis, reduce environmental pollution, protect the ecological environment, the development and utilization of biomass energy is particularly important.The comprehensive utilization of biomass energy has been increasingly valued, biomass pellet fuel production equipment has been further development.In the use of biomass energy, because of the wood powder, straw, wood chips, sawdust, the shells with high moisture content, if the raw material direct combustion, thermal efficiency is very low, incomplete combustion and gasification of water take away a large number of high temperature thermal energy, the wet material burning will produce a large amount of smoke, this will increase environmental protection costs.
International general biomass utilization method is biomass after crushing, drying and dewatering, removal ash, high pressure molding, moisture to 12-15%, heat 4000-4800 kcal/kg, ash content of 1% or less, made into energy pellet fuel, high efficient used.

The biomass pellet fuel as below:
 

92cadb4c8338cbf1205b3e049e8cb7fe.jpg


High humidity materials forming experts zhengzhou Dingli company according to the market demand, company targeted development of material pellet fuel production line equipment, this production line applicable to the wood chips, sawdust, bamboo shavings, wood shavings, barley straw, oat straw, wheat straw, rye, straw, rice straw, sorghum straw, corn stalks, stem drying potato vines, beans, peanut vine and other moisture content 35-65% materials drying and molding.The pellet machine using die roll extrusion principle, the agriculture residues biomass raw materials processed into solid molding fuel, this will realize to continuous and stable production of industrialization.Processing route use one time drying, secondary crushing, continuous feeding and adjust feeding mixed process combining ,the particle shaping fuel rate of 98%, bulk density and particle density is high.

High-quality high-tech products not only occupy the domestic market (including Taiwan, Hong Kong, Macao), also export More than 20 countries, such as America,Germany,England,India and so on.Our company has more than 300 strategic cooperation partners in the global.Our company has obtained ISO9000, 14001 and CE product certification. Large capacity , high efficiency and energy saving, security, environmental protection, cover an area of an area small,etc get customers’ praise.

Biomass pellet fuel production line main equipment:

38af028111c4c0c79b94749028623182.jpg

 product feature
1.Patent technology (patent no. : ZL200920089749.2), single equipment the kinds is variety, application to a variety of materials, modular structure, optimize configuration, ensure production line broad applicability
2.This production line can according to customer's requirements to realize intelligent control, a key "fool" type operation, the operation parameters can be automatic control, the production line running is always in the best condition, ensure the production capacity and product quality
3.More than 300 users in the world, our factory has the rich practical experience.
4.The cover area reduce 50% than the traditional drying granulating production line , civil investment reduced about 50%.
5.The internal structure of the dryer with various efficient feed device combination modes, it effective regulation of drying process and heat distribution, high heat utilization, waste gas discharge temperature is lower than 50 ℃, all of design ensure the production line running low energy consumption.
6.Processing route use one time drying, secondary crushing, continuous feeding and adjust feeding mixed process combining ,the particle shaping fuel rate of 98%, bulk density and particle density is high.This drying and pelleting production line can realize the scale, continuous and stable production,  meet the requirements of industrialization of biomass pellet fuel.
7.Special design ash control technology, it can be meet the requirements of the customer product ash content lower than 1%.
8.Modular dust collecting and purifying heat recycling configuration, safe and protect environmental
9.this type mixing drum dryer is supporting many new type energy-saving hot air stove,high efficiency and energy saving,heating can be control,simple operation,energy consumption dropped about 30%,power consumption reduce 20%,lower operation costs.
10.Internet sharing system, it can ensure that the personalized production line , accessories and  unit efficient distribution in place

Biomass raw material dryer machine and pellet machine:

91afa984bbbd55cc670e4302e8af8b0a.jpg

Technical parameters

Model
DLKL1000
DLKL1500 DLKL2000 DLKL3000 DLKL5000
Capacity(t/h)
0.8-1.0
1.2-1.5
1.5-2.0
2.5-3.0
4.5-5.0
Motor Power(kw)
135
175
210
255
300
Weight(ton)
45
47
55
68
73
Area(m2

10×24m

10×24m
10×24m
12×26m
12×26m

Video


Message
Please fill in this form, we will reply you within 24 hours。
Name: *
Email: *
Tel:
Message(*):
(Such as raw material type, capacity in TPH,moisture percentage final product usage)