Home > Dryingseries>Yeast Dryer
Product Center
Products Details
Yeast Dryer

Yeast Dryer

【Application】yeast
【Capacity】600--3000 kg per day
【Motor】5.5-22 KW
【Steam Pressure】0.25-0.35 Mpa

                                                                                     Yeast Dryer Introduction

JHD yeast drum dryer is single cylinder dryer which can be used in a variety of pulp drying, especially suitable for the brewery recycling waste yeast. Different specifications of the dryer can meet the needs of the annual output of ten thousand to eight hundred thousand brewery. This machine is suitable for food, chemical, pharmaceutical and other industries in the drying process.

Yeast dryer at our workshop:

 yeast dryer.JPG

Structure and working principle:
Yeast dryer, the set of equipment host includes the dryer, frame, driving system, scraper device, material limit device, scraping device, feeder, steam system structure.In addition, equipped with electric control cabinet and exhaust hood.This machine is a kind of indirect heating way to make the material heated then water vaporization,using steam heating.The dryer (roller) outer surface is processed and the surface finish high metal hollow cylinders, the transmission device driven by a gear drive big and small size of the gear drive), drying cylinder axial rotation and speed can be adjusted.Put pulping in the preheating tank preheated then preheated  50 ℃ or so, the dryer with transporting pump input lower chute and the dryer down in about 60-80mm, the rotating cylinder outside surface is coated with a layer of paste.The steam pressure is 0.15 M pa to 0.3 M pa in the drying cylinder,pulping on the outer wall of the dryer is heated, after water evaporation then discharged by induced draft fan.Drying cylinder rotation circle then material complete drying, knot pieces of material on the outer wall of the dryer and completed by scraper discharge to discharging hole.Details refer to the company patents: ZL 2009 2 0090842.5 beer yeast dryer.

yeast dryer.JPG
The main characteristics and performance:
The cylinder which parts contact with material is made of high quality after grinding of cast iron manufacturing, has many good characteristics like corrosion resistance and no pollution. As it is conductive heating then without drying medium take away heat from the machine, and high heat utilization rate, low energy consumption, generally availability is more than 70%.The machine has compact structure, covers less area, easy operation and maintenance etc.. this machine absorbing the German prototype’s advantage, has better performance.

The influence factors of the yeast dryer as follows:
(1) Steam pressure (0.1-0.4Mpa) or heating medium temperature;
(2) Rotation Speed (4 ~ 10 r/min)
(3) Thin Film Thickness (That is the thickness of the material attached to the surface of the cylinder)
(4) Material Characteristics (such as solid content, liquidity and temperature, etc.)

Technical parameters

Model

JHD1500×2000

JHD1500×2350

JHD2000×2500

JHD2000×3000

JHD2500×3000

JHD2500×4000

Capacity (kg/h)

30-40

40-60

50-80

70-100

90-120

110-160

Drum Size (mm)

Φ1500×2000

Φ1500×2350

Φ2000×2500

Φ2000×3000

Φ2500×3000

Φ2500×4000

Drum Rotation Rate( r/min)

4-8

4-8

4-8

4-8

4-8

4-8

Steam Working Pressure (Mpa)

≤0.3

≤0.3

≤0.3

≤0.3

≤0.3

≤0.3

Total Power (kw)

6.97

9.37

13.7

17.7

17.7

22

Steam Consumption (kg/h)

240-280

282-330

400-468

480-560

600-700

800-936

Case


Message
Please fill in this form, we will reply you within 24 hours。
Name: *
Email: *
Tel:
Message(*):
(Such as raw material type, capacity in TPH,moisture percentage final product usage)